and it works fine if i cut across the grain. ... a cross-cut saw. you can see those teeth there. look at that, those brutal teeth. this was standard world war i issue, a chainsaw.

Crosscut saws have more and finer teeth than ripsaws, ... (18 teeth per inch) and fine (24 teeth) blades on hand, and buy coarse or very-fine blades if needed.

Tooth pattern. Big teeth spaced far apart give a rough cut, such as when you’re ripping through softwood boards. On the other end of the scale, lots of small, fine teeth would get clogged up ...

While saw blades tend to look similar, there are two common types that are useful for a wide variety of jobs -- crosscut and rip-cut saws. Which do you need? Tech. ... more evenly distributed teeth.

Then move on to the next tooth. The 20 degrees is a solid rule of thumb, but you might need a slightly different angle for any particular blade based on its tooth count, the original tooth angle, etc.

Crosscut capacity: 12 11/16 in. ... It pairs perfectly with the saw's 40-tooth blade and slide action ... All but the most demanding users will be fine using the standard 3-Ah batteries. 2 ...

A cross-cut saw is a two-person tool, roughly 6 feet long and sporting teeth that would do any predator proud. The cutting edge is angled at an alternating pattern on each tooth to make it more ...

He makes one and two man crosscut saws and bow saws. ... On average it takes 35-40 hours to complete a cross cut saw and 12-15 hours to complete a bow saw. Each tooth is razor sharp.

It can crosscut a 2 x 8. Its miter and bevel setting will let you cut most crown and trim, except for the really big stuff. The saw has the usual positive stops at 0, 15, 22.5, 31.6 and 45 degrees.

Bear in mind that this trick won't work with every single type of handsaw. Most modern tooth saws and backsaws should have the necessary handle shape to accommodate tracing out your cutting angles.